|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Couplers with Connectors (H Type) HDH Series sFeatures 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation. HDH-00803GHD HDH-01503GHD 2.Power Uniform Distribution and 90Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 90phase difference between the two outputs (or two inputs). HDH-01503GH HDH-03003GHD 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. HDH-06003GHD HDH-09003GHD HDH-12803CHD 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. sProduct Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 2 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item 1.Contact resistance 4 m ohms max. 2.Insulation resistance 1000 M ohms min. 3.Vibration 4.Shock Standard 1A 100 V DC Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more No damage, cracks, or parts dislocation acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : -55c +5c to +35c +85c +5c to +35c Time : 30 15 max. 30 15 max. (Minutes) 200 cycles 5.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. sMaterials Part Connector Body Material Stainless steel Beryllium copper PTFE Aluminum Dielectric Finish Passivated Gold plating ----------------- Connector female contacts Connector Insulator Case Board Gold plating 16 sOrdering Information HD H - 008 03 G H D 1 2 3 4 5 6 7 1 Series Name: HD (Directional Couplers) 2 Type of Connector H: Indicates the HRM (SMA) Series 4 Coupling 03:3dB 5 Frequency Relative Bandwidth B:From 5% to below 10% C:From 10% to below 15% D:From 15% to below 20% G:From 30% to below 35% 3 Center Frequency 008: 0.75GHz 015: 1.5GHz 017: 1.7GHz 020: 2.0GHz 030: 3.0GHz 040: 4.0GHz 060: 6.0GHz 090: 9.0GHz 128: 12.8GHz 6 Form H:H Type 7 D:With Termination sSpecifications Part Number Frequency Range (GHz) 0.5~1.0 Coupling (dB) Frequency Sensitivity 0.5 Directivity (dB Min) 20 Primary Line Secondary Line V.S.W.R. V.S.W.R. (Max) (Max) 1.15 1.15 Weight (g) 49 Power (W) 02 HDH-00803GHD 0 3+0.2 HDH-01503GH 1.0~2.0 3+0.2 0 0.5 20 1.20 1.20 34 50 HDH-01503GHD 1.0~2.0 0 3+0.2 0.5 20 1.20 1.20 34 2 HDH-01703CH 1.5~1.9 3+0.2 0 0.3 20 1.20 1.20 34 50 HDH-01703CHD 1.5~1.9 0 3+0.2 0.3 20 1.20 1.20 34 2 HDH-02003DHD 1.7~2.3 0 3+0.2 0.3 18 1.20 1.20 34 2 HDH-03003GHD 2.0~4.0 0 3+0.2 0.5 18 1.20 1.20 25 2 HDH-04003BH 3.7~4.2 3+0.2 0 0.3 20 1.20 1.20 23 50 HDH-06003GHD 4.0~7.8 0 3+0.3 0.5 17 1.25 1.25 23 2 HDH-09003GHD 8.0~11.0 3+0.3 0 0.5 15 1.30 1.30 31 2 HDH-12803CHD 10.5~14.5 0 3+0.6 0.5 12 1.40 1.40 31 2 qDirectivity have had the coupling (nominal value of 3 dB) subtracted. qThere is a phase difference of 90between the output and the coupling. 17 sExternal Dimensions 18 sTypical Data 19 Couplers with Connectors (I Type) HDH Series sFeatures 1.High Performance The high frequency characteristics feature. Extremely high degree of matching, and high isolation. HDH-00810GID HDH-01510GID 2.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 3.Couplers with SMA Connectors HDH-02249AI HDH-03020GID Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. 4.Full Coupling Variations Full variations of coupling over 6 dB are available. HDH-06020GID HDH-09010GID HDH-12806CID sProduct Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) 0.5 to 14.5 GHz 50 ohms 4 to 50 W Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item 1.Contact resistance 4 m ohms max. 2.Insulation resistance 1000 M ohms Max. 3.Vibration 4.Shock Standard 1A 100 V DC Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, No electrical discontinuity of 1 s or more No damage, cracks, or parts dislocation acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 980 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : -55c +5c to +35c +85c +5c to +35c Time : 30 15 max. 30 15 max. (Minutes) 200 cycles 5.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. sMaterials Part Connector Body Material Stainless steel Beryllium copper PTFE Aluminum Dielectric Finish Passivated Gold plating ----------------- Connector female contacts Connector Insulator Case Board Gold plating 20 sOrdering Information HD H - 008 10 G I D 1 2 3 4 5 6 7 06 : 6dB 10 : 10dB 20 : 20dB 30 : 30dB 37 : 37dB 49 : 49dB 1 Series Name: HD (Directional Couplers) 2 Type of Connector H: Indicates the HRM (SMA) Series 4 Coupling 3 Center Frequency 008 : 0.8GHz 009 : 0.9GHz 015 : 1.5GHz 017 : 1.7GHz 022 : 2.2GHz 030 : 3.0GHz 060 : 6.0GHz 090 : 9.0GHz 128 : 12.8GHz 5 Frequency Relative Bandwidth C: From 10% to below 15% G: From 30% to below 35% 6 Form I: I Type, H: H Type 7 D: With Termination Isolation port with termination is designated as D at the end of each part No. sSpecifications Part Number Secondary Primary Line Frequency Frequency Insertion Coupling Directivity Line V.S.W.R. Range Sensitivity Loss (dB MIN) (dB) V.S.W.R. (dB) (GHz) (dB MAX) (MAX) (MAX) 0.5~1.0 0.5~1.0 0.8~1.0 1.0~2.0 1.0~2.0 1.4~1.6 1.4~1.6 1.5~1.9 1.5~1.9 1.5~1.9 1.5~1.9 2.11~2.2 2.11~2.2 2.11~2.2 2.0~4.0 2.0~4.0 4.0~7.8 4.0~7.8 8.0~11.0 8.0~11.0 8.0~11.0 10.5~14.5 101.0 201.0 371.0 101.2 201.2 +1.0 30_2.0 Weight (g) 49 50 50 34 34 34 34 34 34 34 34 42 42 42 25 25 23 23 24 24 24 28 28 28 Power (W) 10 50 50 10 50 50 50 05 10 50 50 50 50 50 10 50 10 50 04 10 10 04 10 50 HDH-00810GID HDH-00820GID HDH-00937CI HDH-01510GID HDH-01520GID HDH-01530CI HDH-01537CI HDH-01706CID HDH-01710CID HDH-01720CID HDH-01730CID HDH-02210AI HDH-02220AID HDH-02249AI HDH-03010GID HDH-03020GID HDH-06010GID HDH-06020GID HDH-09006GID HDH-09010GID HDH-09020GID HDH-12806CID HDH-12810CID HDH-12820CID 0.75 0.75 0.5 0.75 0.75 0.25 0.3 0.3 0.3 0.4 0.4 0.25 0.25 0.25 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.5 0.5 0.5 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.4 0.4 0.4 0.4 0.8 0.3 0.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.1 20 18 20 20 18 20 20 18 20 20 18 18 16 15 18 18 17 17 15 15 13 15 15 15 1.15 1.15 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.25 1.25 1.30 1.30 1.30 1.30 1.30 1.30 1.15 1.15 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.25 1.25 1.30 1.30 1.30 1.35 1.35 1.35 37 +1.0 _1.5 61.0 101.2 201.2 301.5 101.0 201.0 491.0 101.2 201.2 101.2 201.2 61.2 101.2 202.0 61.0 10.5~14.5 101.25 10.5~14.5 201.25 1.1 0.6 qThe coupling loss component is not included in the insertion loss (unless the item is marked with an symbol) 21 sExternal Dimensions 22 sTypical Data 23 |
Price & Availability of HDH-12803CHD |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |